facebook pixel

Intervac123

[7] Romex wire was routed from a power outlet box in a nearby compartment to the area where the vacuum housing was mounted. [8] A new power outlet was installed next to the vacuum housing, which has a pigtail with a standard plug that can be connected directly to the outlet. The vacuum can also be hardwired into the 120-volt AC system.
[4] For this installation, an unused compartment at the floor was used to mount the vacuum housing and necessary hoses and fittings. [5] An accurate template is provided with the kit for determining the location of the fasteners that hold the vacuum housing in place. Here, the screws were driven through the paper. [6] Two 20-gauge wires are routed from each valve port to the yellow wires in the bottom of the vacuum housing.

Products

Garmin RV 890 GPS

Garmin GPS for Motorhomes

Garmin’s new RV 890 GPS navigator offers a large 8-inch edge-to-edge display that can be viewed in portrait or landscape mode. The RV 890...
REDARC RedVision system

REDARC Launches RedVision Total Vehicle Management System

REDARC Corp. is excited to announce the launch of RedVision — a game-changing total vehicle management system that gives users an unprecedented level of...
Xantrex Charge Controllers

Solar Power for Your Motorhome

Xantrex has added two new lithium-ion compatible solar charge controllers to its energy-management solutions. The new 30A MPPT charge controller ($299) features dual bank...
Dometic DMC4101 Fridge

New Dometic 12-Volt RV Refrigerator

The new Dometic DMC4101 12-volt refrigerator is now available directly to consumers. The residential refrigerator is powered by a Dometic-designed 12-volt compressor that is...
AnchorHogs

Secure Your Motorhome Gear

Add another layer of security when storing gear outside, in your motorhome’s storage compartments, or at your residence with AnchorHog. The AnchorHog is a...