DSC_0194

A dry interior starts with the exterior. Sealant around roof vents, skylights, antennas, etc., can break down over time, allowing moisture to seep in. The good news is, prevention requires little more than some elbow grease; the first step is to carefully scrape away old sealant (a putty knife is OK on aluminum and fiberglass roofs only. Otherwise, use a non-marring plastic scraper carefully to prevent tearing the roof membrane).
EternaBond tape is another way to prevent water/moisture intrusion. It can be used around roof vents, transition seams (as in where the front/rear cap meets the roof) or any place there is damage on the roof. Use care when applying, however; as the name suggests, once it’s in place, it’s there for eternity.

Products

Blue Ox Alpha 2 Tow Bar

Alpha 2 Tow Bar

  Blue Ox has upgraded the design of its popular Alpha dinghy tow bar. The new Alpha 2 is rated for vehicles up to 6,500...
Winegard AIR 360+ amplified omnidirectional antenna

Full Circle

  The Winegard AIR 360+ is an amplified omnidirectional antenna for over-the-air VHF/UHF and FM signal reception. The AIR 360+ is easy to install and...
Graphic illustration of cars on highway detected by safety system

Let’s Not Meet by Accident

RV manufacturers and aftermarket suppliers offer a variety of systems that can help make motorhome travel safer Driving down the highway, you activate the turn...
Dreamfoam Bedding’s ASPEN 10" Latex RV Mattress

Camp Comfort

  The ability to get a good night’s sleep in your motorhome is one of the many reasons we love the lifestyle. Dreamfoam Bedding’s ASPEN...
cube-shaped RV-audio JENSEN JWM20 Wall Mount Stereo

More Features in a Nice Cube

ASA Electronics is offering its first-ever cube-shaped RV-audio solution, the JENSEN JWM20 Wall Mount Stereo. The JWM20 features JENSEN’s smallest footprint to date and...