facebook pixel

DON_006_4859

5. Both sides of the defect were cut leaving two ends of the airline free. Try to cut as little as possible so the hose is not too short to be rejoined.
7. First, slide the nut over one end of the hose followed by the ferrule. Then push the air line over the fitting on the main body of the union until it bottoms out. Pull the nut down over the ferrule and tighten with a wrench. Then repeat on the other end. Since the fitting seals on the inside between the ferrule and the hose, no thread sealant is required.

Products

Honda EU3000is Generator

Honda Generators to Feature CO Detection

Honda Power Equipment has announced it will begin equipping all models in its portable generator lineup with CO-MINDER, a new advanced carbon monoxide (CO)...
Yamaha Sound Bars

Yamaha Sound Bars

Yamaha is expanding its range of home-theater sound bars by adding two new models, the SR-C20A and SR-B20A, to its lineup. Each sound bar...
RVi Breakaway Wireless Adapter

Wireless Breakaway Adapter

RVi’s new Breakaway Wireless Adapter for the RVibrake3 dinghy-braking system is designed to eliminate the frustration of routing a breakaway system through the firewall...
Onan P2500i Generator

Portable Onan Generator

Cummins Onan has arrived on the portable scene with the P2500i Digital Inverter Portable Generator. The genset features a 3.4-hp, 98 cc OHV four-stroke...
Garmin RV 890 GPS

Garmin GPS for Motorhomes

Garmin’s new RV 890 GPS navigator offers a large 8-inch edge-to-edge display that can be viewed in portrait or landscape mode. The RV 890...