Installing new slide-topper fabric isn’t difficult, and costs just a fraction of a new hardware assembly
The humble slide-topper awning is the unsung hero of our RVing experiences. Just think of all the work they do: They keep the sun off the slideout roofs, which helps prevent UV damage, and in the winter months, they deflect rain and snow and prevent leaves, pine needles and other debris from landing on the slideout roof, which reduces your cleaning efforts and extends the life of seals and the slide mechanism. But as faithful a friend as they may be, they don’t last forever — eventually the sun and environmental foes like acid rain and ozone take their toll on the awning material, causing it to fade, split and crack. At some point, a replacement will be necessary; the good news is, you don’t have to install the entire assembly — just the material itself.Dometic offers replacement fabric that can be ordered in a wide selection of fabrics, sizes and colors to suit most motorhomes. The process isn’t very difficult, but you must be able to accurately measure the size of the fabric to make sure the new material fits the slide-topper assembly properly. You’ll also need some hand tools, some DIY know-how and some basic knowledge of how the assembly works. The fabric is under spring pressure, so it is imperative that the assembly be handled with extreme care to prevent injury. Also, bear
in mind that the material can be quite cumbersome to handle on your own, so it’s probably a good idea to ask an adventurous friend for some help with this one.
We recently installed new slideout-topper fabric on a 2005 Itasca motorhome that has spent its life in Southern California and was stored outdoors. The fabric had deteriorated to the point that it was no longer functional, which naturally put a damper on any camping trips last summer. We ordered three rolls of material for the varying sizes on the coach, which were installed in about two
hours per awning.
If an installation such as this one is beyond the scope of your abilities, have no fear — a qualified RV repair center or Camping World can do the work for you. And the good news is, you won’t have to wait for a special-order size to arrive; Dometic recently began offering bulk SlideTopper fabric to its dealers, which comes in a dispenser box and can be rolled out and cut to the desired width. The material comes with pre-installed poly cords and is available in black and white. So unless you need a special color, make sure to contact your dealer first before ordering custom fabric if you plan to have the replacement material installed for you. Figure around $400 for the fabric and labor for each slide-out topper.