No More Shake ’N’ Break

wine-glass-holder-mod

April 29, 2014
Filed under Quick Tips

Bookmark and Share

 

Having gone through various racks, and still having wine glasses jingle and turn over, I decided to make my own. I used two pieces of 2-by-4-inch lumber glued side by side (the length was determined by the glass size). Then I made a template by placing the wine glasses upside down and tracing each one with a pencil. Next, I drilled the holes slightly larger than the size of the glass. And finally, I finished the wood with a clear satin and added four ½-inch “feet,” which can be purchased or made from a scrap of wood to raise the glass holder. Now I no longer have overturned or broken glasses and it’s noise-free.

Don Davis | Bristol, Tenn.

 

 

Print Friendly

Related Content

Last 5 stories in Quick Tips

Other stories that might interest you...

Comments

Feel free to leave a comment...
and oh, if you want a pic to show with your comment, go get a gravatar!





Get a FREE issue of Motor Home Magazine

Sign up for your trial subscription and you'll receive a FREE issue. If you like Motor Home, pay just $19.97 for 11 more issues (12 in all). Otherwise, write "cancel" on the invoice, return it and owe nothing.