Intervac123

[7] Romex wire was routed from a power outlet box in a nearby compartment to the area where the vacuum housing was mounted. [8] A new power outlet was installed next to the vacuum housing, which has a pigtail with a standard plug that can be connected directly to the outlet. The vacuum can also be hardwired into the 120-volt AC system.
[4] For this installation, an unused compartment at the floor was used to mount the vacuum housing and necessary hoses and fittings. [5] An accurate template is provided with the kit for determining the location of the fasteners that hold the vacuum housing in place. Here, the screws were driven through the paper. [6] Two 20-gauge wires are routed from each valve port to the yellow wires in the bottom of the vacuum housing.

Products

King Combi step ladder

King Kombo

Considering the limited storage space in a motorhome, a conventional ladder may seem like a luxury item. But when that one item can perform...
ENSEN JWM45 Two-zone Stereo

JENSEN JWM45 Two-zone Stereo is Twice as Nice

Music is an important part of the motorhome lifestyle, inside and out of the coach. ASA Electronics now offers the JENSEN JWM45 Two-zone Stereo....
Dometic-PLB40-Portable-Li-battery

Dometic PLB40 Portable Lithium Battery

Perfect for off-grid camping, the Dometic PLB40 lithium battery was designed to run 12-volt DC appliances — specifically, Dometic’s line of CFX mobile compressor...
Photo of Oru folding kayak

Origami On the Water

Looking to ply the waters but don’t have the space to store a traditional kayak? Oru has launched its first tandem folding kayak, the...
Photo of 30 amp Power Watchdog RV surge protector

Smart Surge Protector Reports RV Power to Your Phone

Hughes Autoformers’ Power Watchdog EPO (Emergency Power Off) combines Bluetooth technology with the automatic shut off and re-start of an energy management system, offering...