Remove the Wiper Arm

After the bolt is removed you will need to remove the wiper arm by rocking it back and forth as it slips off the splined shaft that drives the wipers.

When the generator cover has been removed, take this opportunity to give an overall visual inspection for any disconnected or loose wires as well as oil or fuel leaks. Gently clean out dirt or cobweb build up as you familiarize yourself with the normal appearance of your generator before there is a problem.
Be sure the refrigerator’s interior cooling fins are intact and evenly spaced for maximum cooling output.

Products

USB LED Reading Light with Flex Neck and Night Light

Flex Charging

Seems like we’re always looking for an open outlet to charge our phones or tablets. SalVinCo introduces a way to charge an electronic device...
Redarc BMS1230S2 main unit with remote lithium solar ready web

Battery of Skills: REDARC Manager30

Australia-based REDARC Electronics has launched The Manager30 battery-management system. The system, which has been available Down Under since 2014, is designed to charge and...
Woman walking past Coway Air Purifier in apartment home with Amazon Alexa behind her.

Breathe Easy at Home and on the Road: The RV Air Mega Purifier

Indescribably Cleaner Air and Smell for Your RV We all know that our RVs can become, how shall we say, funky smelling from time to...
The Drive 4G-X RV by weBoost

Give Cell Signals a Boost

Can you hear me now? If not, you may need a cellular signal booster in your motorhome. The Drive 4G-X RV cellular signal booster...
Yamaha EF2200iS protable generator

Power By Yamaha: Efficiency and Technology Combined

Yamaha Motor Corp. USA introduces the all-new EF2200iS portable inverter generator. The 55-pound EF2200iS is powered by a high-output MZ80 OHV, air-cooled, single cylinder...