3

A typical termination-valve assembly (left) has a 3-inch-diameter black-water hub with a black handle and a 1½-inch-diameter gray-water hub with a gray handle. If the termination valve sticks or leaks, it may need to be serviced. Here, a valve is disassembled (right). The two flanges will be glued to the pipe on the RV, and the gaskets seated. The valve can be cleaned and then lubricated with valve grease, such as Dow Corning Molykote 111. Once the valve is working well, the new gaskets are installed on the flanges. The pipes are manually pried apart for the valve to slide in between (a helper makes this easier), and the four bolts are installed.
The rear door on the Destiny allows for a more flexible layout. The sleek design is virtually devoid of clutter.

Products

King Combi step ladder

King Kombo

Considering the limited storage space in a motorhome, a conventional ladder may seem like a luxury item. But when that one item can perform...
ENSEN JWM45 Two-zone Stereo

JENSEN JWM45 Two-zone Stereo is Twice as Nice

Music is an important part of the motorhome lifestyle, inside and out of the coach. ASA Electronics now offers the JENSEN JWM45 Two-zone Stereo....
Dometic-PLB40-Portable-Li-battery

Dometic PLB40 Portable Lithium Battery

Perfect for off-grid camping, the Dometic PLB40 lithium battery was designed to run 12-volt DC appliances — specifically, Dometic’s line of CFX mobile compressor...
Photo of Oru folding kayak

Origami On the Water

Looking to ply the waters but don’t have the space to store a traditional kayak? Oru has launched its first tandem folding kayak, the...
Photo of 30 amp Power Watchdog RV surge protector

Smart Surge Protector Reports RV Power to Your Phone

Hughes Autoformers’ Power Watchdog EPO (Emergency Power Off) combines Bluetooth technology with the automatic shut off and re-start of an energy management system, offering...