09_Eyes

With the ECU bolted in place, install the flexible sleeve over the antenna to 
prevent it from folding up while driving.

Make sure each sensor is installed in numerical order, beginning at the driver’s side.
You will encounter many different fuse blocks and fuse types during installation. We found this handy fuse tap at an auto parts store that made installation of the power wire much simpler.

Products

Sponsored Content: REDARC BCDC Battery Chargers

New multistage chargers from REDARC use solar power for motorhome house batteries Need to keep your motorhome’s house batteries charged? REDARC’s Dual-Input BCDC in-vehicle battery...
Class A motorhome with zip dee awning

Two-stage Convenience

Awnings by Zip Dee now offers the Century 2, a roof-mounted awning designed to add awning strength without overextending into neighboring RV sites. The...
King Combi step ladder

King Kombo

Considering the limited storage space in a motorhome, a conventional ladder may seem like a luxury item. But when that one item can perform...
ENSEN JWM45 Two-zone Stereo

JENSEN JWM45 Two-zone Stereo is Twice as Nice

Music is an important part of the motorhome lifestyle, inside and out of the coach. ASA Electronics now offers the JENSEN JWM45 Two-zone Stereo....
Dometic-PLB40-Portable-Li-battery

Dometic PLB40 Portable Lithium Battery

Perfect for off-grid camping, the Dometic PLB40 lithium battery was designed to run 12-volt DC appliances — specifically, Dometic’s line of CFX mobile compressor...